Oriented Bent SUB

The oriented sub is a major power deflection tool having a fixed angle (a) deviated from low end thread of the bent sub to axial line of drill stem, the power drill tool under the application of oriented sub give the bit a constant lateral force to ensure that the bit can cut on the well wall laterally and further drill into a curved well trace.

Parameter of Oriented Bent SUB

The oriented sub is a major power deflection tool having a fixed angle (a) deviated from low end thread of the bent sub to axial line of drill stem, the power drill tool under the application of oriented sub give the bit a constant lateral force to ensure that the bit can cut on the well wall laterally and further drill into a curved well trace.

Operation method

  • After the bit and oriented sub are connected and screwed, detecting of the angle between the big water hole of bit and oriented key of oriented sub shall be done;
  • After run in drill tool, calculate out the azimuth of big water hole of bit according to the azimuth of oriented key determined at a single point by drift indicator;
  • Change the big water hole of bit into required azimuth, then lock in rotary and stat pump drilling to cut in;
  • During deflecting, taking a way that deflect while lightly pressing and crowning of drill to help deflection;
  • After deflected for 2 to 3 meters, drill in 4 to 5 meters with lightly pressure and rotating slowly;
  • Repeat above operation for several times, when the angle of deviation is to the expected requirement deflecting in can be done smoothly by reducing of drill pressure and increasing of rotating speed.
Model O.D.mm(in) Connection Bent angle a (degree) I I.D. of oriented sleeve(mm)
Box Pin
DZT89 89(3 1/2) NC26 NC26 1.5 36
2
DZT140 140(5 1/2) NC38 NC38 0-3.5 36
DZT159 159(6 1/4) NC46 4 1/2REG 50
DZT165 165(6 1/2) NC50 NC50 50
DZT178 178(7) 5 1/2 FH 5 1/2 FH 50
DZT203 203(8) 6 5/8 REG 6 5/8 REG 50

Want to Know More Detail About This Drilling Equipment?

Scroll to Top

Request A Quote

We will contact you within 24 hours after receiving your inquiry.